Simple, step-by-step, video on how to setup the SIP (Voice Over IP) service on a Polycom VVX phone using CallCentric as the service provider. This video is geared for people who are new to the VOIP field. SIP is the dominate VOIP protocol in use today.
A SIP Account is required in order to be able to make calls with your Polycom phone.
This video demonstrates setup using the Call Centric SIP serivce. You can find them here:
Things you will need:
– Polycom VVX phone (201,300,310,311,401,400,411,500,511,600)
– Callcentric account
– wired Network connection
– Polycom power supply adpater (unless your network provide Power Over Ehternet)
You must begin with the Polycom phone either being new or factory defaulted. For example if you purchased the phone in a used condition, you may need to factory default it before you can enable the SIP service. There is a link in the video to another video which has these instructions.
Follow the steps in the video to create a new extension in your CallCentric account
Then, take the Authentication ID number (usually 1777xxxxxxx) and the password you created to setup the phone’s SIP information.
From the SETTINGS screen
Go to ADVANCED
Password is 456 (if this does not work, you phone is probably not factory defaulted)
Go to Administration Settings
Go to LINE CONFIGURATION
Choose LINE 1
Enter the ADDRESS as the 1777xxxxx number
Then go to LINE KEYS, set that to 2 or 3 (your prefrence)
Then go to AUTHENTICATION
– use login Creds = NO
– DOMAIN = Callcentric.com
– USER ID = (your 1777xxxxx number)
– password = (you createdd in extension setup on Callcentric)
Go To SIP PROTOCOL
choose SERVER 1
Address = callcentric.com
Register = yes
Transport = UDP Only
Then hit the back key until you get to a screen that says:
Exit w/o save
choose SAVE CONFIG
Phone should now attempt to register to the registrar for Callcentric. Try to make a call.
If you do not have a CallCentric account, you can setup one up here